Brand: Riepe
Product Code: Cleaning Agent LP 163/93®
Availability: In Stock
On Request
Ex Tax: ₹0.00

Qty

Icon Contact Seller
Contact Form
  • Email

    info@woodzonmail.com

  • +91 95133 52525 +91 95133 52515

    Mon - Sat: 9:30 - 18:30

Contact form
This unit is used to spray the cleaning agent LP163/93® on the top and bottom surface of the board edge, as well as the edgeband. The release agent applied at the machine infeed side and the loose glue residue are removed by the application of the cleaning agent and subsequent buffing. Furthermore, the glue joint and the edge banding are cooled. Heat generation during buffing is considerably reduced by the application of the liquid. Smearing of glue emerging from the joint is avoided. The edge banding radius is wet buffed with the special cleaning agent LP163/93®. As a consequence, heating of the thermoplastic material is notably reduced, and a smearing of the plastic is prevented. Moreover, the radius is polished to match the surface sheen. Glue residue no longer adheres to the buffing wheels. Result: An absolutely clean board edge! This result can only be obtained when the buffing wheels is used across its entire width without oscillation. The buffing disc must be used with an inclination in relation to the workpiece of 3°, without oscillation and applying only slight pressure. Rotational direction should be in synchronous run to reduce heat generation. Consumption per fine nozzle: under 1 liter for 5000 running meters. The electronically controlled cleaning agent spraying unit only requires a compressed air connection of 3 bar and a 230/24 V socket.
Specification
Brand Name Riepe
Model Number Cleaning Agent LP 163/93®
Application Type Machine infeed
Usage Before buffing wheels
Net weight NA
Place of Origin Red
Warranty Yes
Material Container: 30 Liter | 200 Liter | 1000 Liter
Load capacity/Life Cycle NA
Thickness NA
Voltage NA
Speed Standard Seaworthy Packing
Packaging Details Delivered through dealers. Transportation charges on actuals.
Delivery Detail This unit is used to spray the cleaning agent LP163/93® on the top and bottom surface of the board edge, as well as the edgeband. The release agent applied at the machine infeed side and the loose glue residue are removed by the application of the cleaning agent and subsequent buffing. Furthermore, the glue joint and the edge banding are cooled. Heat generation during buffing is considerably reduced by the application of the liquid. Smearing of glue emerging from the joint is avoided. The edge banding radius is wet buffed with the special cleaning agent LP163/93®. As a consequence, heating of the thermoplastic material is notably reduced, and a smearing of the plastic is prevented. Moreover, the radius is polished to match the surface sheen. Glue residue no longer adheres to the buffing wheels. Result: An absolutely clean board edge! This result can only be obtained when the buffing wheels is used across its entire width without oscillation. The buffing disc must be used with an inclination in relation to the workpiece of 3°, without oscillation and applying only slight pressure. Rotational direction should be in synchronous run to reduce heat generation. Consumption per fine nozzle: under 1 liter for 5000 running meters. The electronically controlled cleaning agent spraying unit only requires a compressed air connection of 3 bar and a 230/24 V socket.

Write a review

Note: HTML is not translated!
Captcha
Related Products