SCM Automatic Edgebander R002002

GENERAL FEATURES:
– Machine frame made of steel, single-block base to guarantee an excellent support for the operating units
– Friction-free worktable with n.3 rollers
– Panel-to-use in any working conditions
– Panel feed by means of a top feeder with high-adherence toothed belt with steel cables inside
– Feeder manual lifting with positioning of all operating units synchronised with the feeder and based on the panel height
– Numeric readout of the selected panel
– Telescopic front support with rollers for all the machine length
– Anodized aluminium outfeed fence
– Glue smokes specific exhaust outlet; centralized exhaust outlet of the other dusts

BASIC MACHINE UNITS:

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM Complete with:
– Hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement
– Glue application on the panel by means of glue spreading roller
– Temperature adjustment of the applied glue integrated in the PLC control
– Device for automatic recovery of unused glue
– Automatic edge loading system for rolled edges with shear device for 2 mm max. thickness edges
– Coil holder plate, 730 mm diameter
– Pressing unit with n. 2 edge pressure rollers: one in steel and the second rubber coated
– Adjustable infeed fence with numeric readout of the edge thickness
– Automatic lowering of the glue pot temperature after a temporary machine non-use

END CUTTING UNIT:
End cutting unit for the cut at 90 deg. on the leading and trailing edges of the panel. Possibility to exclude the unit through PLC.

SUPERPOSED TRIMMING UNIT:
– Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point.
– The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

EDGE SCRAPING UNIT:
For the finishing of 2 mm PVC/ABS edges.
– It assures an excellent vibration free finish thanks to its high rigidity structure.
– High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.
– Pair of R=”2″ mm knives included.
– Manual exclusion of the unit.

TECHNICAL SPECIFICATION
– Worktable dimensions [mm] : 2600 x 530
– Worktable height [mm] : 904
– Thickness of rolled edges [mm] : 0,4 – 2
– Max. thickness of edges in strips [mm] : up to 5
– Min. – max. working height [mm] : 12 – 50
– Min. – max. panel height using edge scraping unit [mm] : 16 to 50
– Min. panel length/width with rolled edges [mm] : 190/65
– Min. panel length (frontal end cutting only) [mm] : 120
– feed speed [m/min] : 7
– Feed motor power S1 [kW] : 0,55
– Pneumatic operating pressure [bar] : 6,5
– Operating temperature [deg.] : 20 to 190
– Exhaust outlet diameter (base) [mm] : 120
– Exhaust outlet diameter (glue pot) [mm] : 60
GLUE POT UNIT:
– Motor power S1 [kW] : 0,18
– Glue capacity [kg] : 0,8
TRIMMING UNIT:
– Motor power S1 [kW] : 0,55
– Widia cutters : Dia. 75 mm Z4
– Cutters rotation speed [rpm] : 12.000