SCM Automatic Wide Belt Sander Cs-95 R001001
FEATURES:
SINGLE COMBINED UNIT “CS” equipped with:
– ‘CR/120’ roller, 120 mm diameter
– 85 SH rubber coated roller
– manual adjustment of working height
– ‘TRP/I’ flat stiff pad made of an extractable bar with felt contact insert density D=”0,68
– manual adjustment of working height
– glued graphite cloth
“CRA” Helicoidal grooved steel calibrating roller
“TSP/I” Semi-stiff flat pad
– for the sanding of veneered panels The pad is made of an extractable bar with rubber contact insert + felt density
D=”0,68
On/Off pneumatic selector of the roller
– activated by pneumatic cylinder, complete with micrometric adjustment of roller position according to the abrasive
belt thickness
On/off pneumatic selector for the pad
– activated by pneumatic cylinder, complete with micrometric adjustment of lining on pressure shoes position according
to the abrasive belt thickness
2 infeed support rollers and two outfeed support rollers
Electronic positioning for working table
– It is equipped with decimal adjustment to pre-set higher or lower workpiece positioning.
– The worktable fall and rise is activated by a sensor and a microswitch located near the gauge.
– On/off selectors allow to disactivate this device in order to carry out the thickness set up by means of fall/rise
worktable pushbuttons
TECHNICAL DATA:
– Working width [mm] : 950
– Min./max. working thickness [mm] : 4-170
– Sanding belt width [mm] : 970
– Sanding belt length [mm] : 1525
– Main motor power [kW (HP)] : 5,5 (7,5)
– Feed belt motor power [kW (HP)] : 0,3/0,55 (0,4/0,7)
– Feed belt speed [m/min] : 4,5/9
Additional information
| Model Number | SKU : DMC-SD-10 |
|---|---|
| Usage | SCM Automatic Wide Belt Sander Cs-95 R001001 |
| Dimension(L*W*H) | NA |
| Net weight | NA |
| Material | Heavy duty frame structure and strong supports assure perfect stability |
| Load capacity/Life Cycle | NA |
| Power(W) | [kW (HP)] : 5, 5 (7, 5), [kW (HP)] : 0, 3/0, 55 (0, 4/0, 7) |
| Thickness | [mm] : 4-170 |
| Delivery Detail | Delivered and installed by manufacturer. Cost on actuals. |
Brand
Caple
-
₹5,208,375.00
₹5,482,500.00SCM Automatic Throughfeed Planer Moulder PROFISET 60 EP
₹5,208,375.00₹5,482,500.00 -
₹415,625.00
₹437,500.00SCM Minimax Wood Turning Lathe T124 R091602
₹415,625.00₹437,500.00 -
₹302,813.00
₹318,750.00Mas MB106A Heavy Duty Thickness Planer Cutter 600mm
₹302,813.00₹318,750.00 -
₹7,095,313.00
₹7,468,750.00KUPER Single Knife Guillotine EFS 2800
₹7,095,313.00₹7,468,750.00 -
₹64,386.00
₹83,702.00Festool Diamant cutting system DSC-AG 125
₹64,386.00₹83,702.00
Reviews
There are no reviews yet.