SCM Horizontal Beam Saw – CLASS-PX250

GENERAL FEATURES
Circular saw with mobile saw unit designed to cut solid wood panels, chipboards, MDF panels, multilayer panels, plywood panels and fiber panels.

STRUCTURE AND BASE
– Steel tubular structure;

PRESSURE BEAM
– Pressure beam with even pressure on entire cutting length,
– Pneumatic vertical adjustment with precision racks and pinions, pressure adjustable from 1,5 to 6 bar;
– Double dust conveying system: one on the top applied directly to the pressure beam to keep the working table clean and one on the bottom applied to the saw carriage

WORK TABLES
– Three front tables (1 table with squaring fence + 2 support tables) and 3 rear tables (1 table with squaring fence + 2 bakelite-coated support tables).
– Each rear support table is equipped with one stop
– Front and rear squaring fences are equipped with one stop;

SAW BLADE UNIT
– 1 motor for the main blade and 1 motor for the scoring blade;
– saw carriage driven by chain;
– Sliding on steel guide and special bronze wheels;
– Adjustment of the saw blade unit return point on the entire cutting width;

CONTROL UNIT
– Mobile command panel to control the machine on both working sides (front and rear)

SAFETY REGULATIONS
– Emergency bar on cutting line, on the front and rear working sides;
– Front safety protection with plastic fingers with compass movement
– Electrical board with high safety features complete with:
*dust-proof cabinet (ip 55 protection) with padlockable main switch;
* Overload motor protection;
* Auxiliary low voltage circuit for the commands, the electronic controls and low voltage signals;
* safety microswitch on blade access door;

TECHNICAL DATA:
– maximum squaring stroke [mm] : 2900
– saw blade diameter : 250
– saw blade bore diameter [mm] : 55
– max. saw blade projection [mm] : 55
– blade rotation speed [rpm] : 4700
– scoring blade diameter [mm] : 115
– scoring blade bore diameter [mm] : 45
– saw blade feed speed [m/mm] : 10 to 30
– saw blade feed (return speed) [m/mm] : 30
Analogical adjustment of return point
– no. 2 tables with fence [mm] : 2000 x 380
– no. 4 support tables [mm] : 1250 x 380
Other technical features:
– saw blade motor power : 3,7 kW (5 hp)
– scoring blade motor power [mm] : 0,55 kW (0,75 hp)
– exhaust hoods diameter [mm] : 100 (1) , 150 (1)
– Additional saw blade Set :