SCM Single Sided Automatic Edgebander R036701

MAIN FEATURES – “ORION ONE PLUS” CONTROL SYSTEM: SIMPLE AND INTUITIVE USE FOR ERROR-FREE MACHINING – AUTOSET – RT-V1 pre-milling unit – VC-VM gluing unit – K-2 end cutting unit – R-K trimming unit – ROUND 1 rounding unit – RAS-V edge scraping unit – 10.99.99 – Security Execution – R0.22.50 – Olimpic K 360 – T-ER1 composition (38) – 93.07.31 – Volt 400 EU – 93.12.01 – Frequency 50 Hz – 62.12.03 – AAR anti-adhesive unit – 62.12.61 – Spray-mist device for edge finishing – 62.12.12 – SP-V brushing unit – 08.04.39 – Pallet for ER1 – T-ER1 composition

MACHINE CONFIGURATION:
– olimpic k 360 composition “T-ER1” (38)
– “RT-V1” pre-milling unit
– “VC-VM” glue pot
– “K-2” single-motor end cutting unit
– “R-K” trimming unit
– “ROUND 1” rounding unit
– “RAS-V” edge scraping unit
– AAR anti-adhesive unit
– Spray-mist device for edge finishing
– RC-N glue scraping unit
– SP-V brushing unit
– Safety regulations The machine is in conformity with the safety regulations.

FEATURES:
Automatic single-sided edge bander for the edge gluing with hot melt glue on straight panels, on the four panel sides, finishing and rounding-off of the panel corners
Main frame made of bended and welded steel plates to ensure a high rigidity structure
Top steel presser, complete with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels.
Manual adjustment of presser at machine infeed with positioning numerical readout
Top operating groups fixed to the presser or mechanically connected on to it to allow the automatic positioning according to the panel thickness. Lower groups fixed to the horizontal beam for a precise reference with respect of the panel.
All frequency motors equipped with inverter.
Safety enclosure on the entire length of the machine with poly-carbonate windows for the groups visualisation during machining.
Exhaust outlets for the operating groups positioned on the top side of the safety enclosure
Mobile control panel at machine infeed for an easy use from the operator’s working position
Electrical cabinet positioned inside the main frame with door that allow an easy access in case of any maintenance operations. The cabinet is in conformity with the current safety regulations
FEED TRACK
made of pads coated with high friction rubber fixed on n ? industrial chain.
Sliding of pads on two guideways , one round and one flat, to ensure straightness of movement and resistance to side loads
Manual pads lubrication
Panel support rollers positioned parallel to the track. It can be extended on the entire lengh of the machine. It is made of telescopic opening system and panel sliding plastic wheels with steel pivot pins.
“Orion One Plus” electronic control with:
4″ graphic display with large and luminous characters
– selection of working language
– keyboard with ?soft touch? pushbuttons and led light, for the selection of the different operating groups and machine functions
– complete control of the machine automation by means of the Plc function and encoder positioned on the panel feed track pinion
– display for the control/set up of the glue pot temperature
– simple and controlled diagnostics to obtain a quick solution to any error
– partial and absolute process statistical data: number of processed pieces/edges and track feeding
Safety regulations
The machine is in conformity with the safety regulations according to the countries of machine destination.

TECHNICAL DATA:
– Track feed speed m/min : 11
– Panel thickness mm : 8 to 60mm
– Thickness of edges in strips mm : 0,3-6
– Thickness of rolled edges mm : 0,3-3
– Max. section of rolled edges mm : 135
– Coil-holder plate diameter mm : 780
– Exceeding material to the panel thickness mm : 2+2
– Distance between two successive panels mm : 600
– Minimum panel length (100 mm min. width) mm : 140
– Min. length of edge in rolls mm : 180
– Min. length of edge in strips mm : 220
– Min. panel width (210 mm min. length) mm : 90
– Opening for panel support roller mm : 500
– Worktable height mm : 900
“RT-V1″ pre-milling unit
– Max. removal [mm?] : 60
– Max removable thickness [mm] : 3
– Panel thickness ** with H=”64mm” tool [mm] : 8-45 (60**)
– Motor power [kW] : 1,5
– Tool diameter [mm] : 100
– Tool height [mm] : 49
– Tool rotating speed [rpm] : 9
“VC-VM” gluing unit :
– Installed power [kW] : 3
– Heating time [min] : 12
– Glue pot capacity [kg] : 1,5
“K-2” end cutting unit :
– Motor power [kW] : 0,2
– Speed of cutters [rpm] : 12000
“R-K” trimming unit :
– Motors power [kW] : 0,55
– Speed of cutters [rpm] : 12000
– Minimum panel thickness with radius [mm] : 12
– Exceeding material to the panel thickness [mm] : 2+2
“ROUND 1” rounding unit :
– Motor power [kW] : 0,35
– Speed of cutters [rpm] : 12.000
– Panel thickness [mm] : 10-45
– Minimum panel length [mm] : 280
– Distance between panels [mm] : 750
– Vertical/front copying pads : pad/pad
– Tool radius [mm] : 2
“SP-V” brushing unit 2 : mm
– Motor power [kW] : 0,13
– Speed cutter [rpm] : 1400