The Release Agent LP113/03? is sprayed onto the corner area of the glued on longitudinal edge to prevent the adherence of glue emerging in the corner as a result of the cross gluing process. The picture shows a fine nozzle used to spray the release agent LP113/03? onto the trailing edge moving in the running
direction.

Upstream of the formatting unit, an ultra-thin coat of the release agent LPZ/II? is applied to the top and bottom surface of the workpieces (edge area) by means of our electronically controlled release agent spraying unit. This prevents squeezed out glue from adhering to the workpiece.
An ultra-thin application of our release agent in the edge area (consumption per nozzle under 1 liter per 5000 running meters) guarantees a perfect result.
The electronically controlled release agent spraying unit only requires a 3 bar compressed air connection and a 230/24V outlet.
Our special release agents are adapted to all commercially available glues. In illustration 1 you can see the installation of the spraying unit inside the cladding directly before the formatting unit, with the relevant fixing bracket. Our fine nozzles are not sensitive to dust and can therefore be fitted directly in front of the tooling.
In illustration 2 you can see the installation outside the cladding, prior to formatting, with the appropriate bracket. On the opposite side of the machine the unit is connected to the longitudinal fence with the appropriate bracket. We also have an assortment of special fixings to meet your needs.
For post- or softforming machines our high heat resistant release agent TH97? is used. This special release agent can pass without problem through hot zones without losing its effectiveness.