-
Novoryt Box with 12 pcs. Novoryt Quattro Sticks Art. Nr. 132.202
Novoryt Box with 12 pcs. Novoryt Quattro Sticks
Art. Nr. 132.202
- assorted 4 colours each 3 pcs. 200mm
- 11 natural oak
- 13 bog oak
- 30 rustic oak
- 31 wenge
-
Novoryt Box with 12 pcs. Novoryt Quattro Sticks Art. Nr. 132.203
Novoryt Box with 12 pcs. Novoryt Quattro Sticks
Art. Nr. 132.203
- assorted each colours 1 pc.
- 08 douglasie/larch
- 11 oak light, 13 bog oak
- 22 walnut dark, 30 oak rustical
- 31 wenge, 34 ibony
- 35 black, 41 light spruce
- 42 white, 76 transparent
- 78 rubberwood
-
Novoryt Box with 12 pcs. Novoryt Quattro Sticks Art. Nr. 132.204
Novoryt Box with 12 pcs. Novoryt Quattro Sticks
Art. Nr. 132.204
- assorted 3 wood optic light colours 4 pcs. each colour 200mm
- 80 optic spruce light
- 81 optic spruce knot
- 82 optic douglasie
-
Novoryt Box with 12 pcs. Novoryt Quattro Sticks Art. Nr. 132.205
Novoryt Box with 12 pcs. Novoryt Quattro Sticks
Art. Nr. 132.205
- assorted 3 wood optic dark colours 4pcs. each colour. 200mm
- 83 optic oak light
- 84 optic oak dark
- 85 optic walnut dark
-
Novoryt Box with 12 pcs. Novoryt Quattro Sticks – assorted by colour
Novoryt Box with 12 pcs. Novoryt Quattro Sticks – assorted by colour
Art. Nr. 132.xxx
wood colours
08 douglasie/ (pine), 11 oak light, 13 bog oak
22 walnut dark, 30 oak rustical, 31 wenge, 34 ibony
41 light spruce, 56 oak greenish, 75 beech steamed light
78 rubberwood light, 79 acacia brownWood optic colour
80 optic spruce light, 81 optic spruce knot, 82 optic douglasie
83 optic oak light, 84 optic oak dark, 85 optic walnut darkUnicolours
35 black, 42 white, 76 transparent, 7016 anthracite grey RAL7016Metallic effect colours
48 silver, 305 bronzeFollowing bright colours
320 fluorescent transparent -
NOVORYT Quattro Smart Repair Set Art. Nr. 134.101
NOVORYT Quattro Smart Repair Set
Art. Nr. 134.101
Area of application: wooden floors, stairs
Content:
- 1 Melting gun mini incl. nozzle
- 1 Cooling block angle
- 1 Cut-off iron mini
- 8 Sticks mini ( 12 cm long, 12 mm Ø – Replacement in the standard 12 Pack (length = 20 cm)
- 2x 35 black, 1x 08 douglas/larch, 11 light oak
- 1 x 30 rustic oak, bog oak, wengé, and 81 knotted pine optic
-
NOVORYT Quattro Smart Repair Set Art. Nr. 134.102
NOVORYT Quattro Smart Repair Set
Art. Nr. 134.102
Area of application: Decor, melamine resin, countertops
Content:
- Â 1 Melting gun mini incl. nozzle
- Â 1 Cooling block angle
- Â 1 Cut-off iron mini
-  8 Sticks mini ( 12 cm long, 12 mm Ø – Replacement in the standard 12 Pack (length = 20 cm)
- Â 2x 35 black, 76 transparent and 42 white
- Â 1x 81 knotted pine optic and 84 dark oak optic
-
NOVORYT Quattro Smart Repair Set Art. Nr. 134.103
NOVORYT Quattro Smart Repair Set
Art. Nr. 134.103
Area of application: lightweight construction
Content:
- Â 1 Melting gun mini incl. nozzle
- Â 1 Cooling block angle
- Â 1 Cut-off iron mini
-  8 Sticks mini ( 12 cm long, 12 mm Ø – Replacement in the standard 12 Pack (length = 20 cm)
- Â 4 x 42 white
- Â 2x 35 black and 76 transparent
-
NOVORYT Quattro Smart Repair Set Art. Nr. 134.104
NOVORYT Quattro Smart Repair Set
Art. Nr. 134.104
Area of application: doors, window profiles
Content:
- Â 1 Melting gun mini incl. nozzle
- Â 1 Cooling block angle
- Â 1 Cut-off iron mini
-  8 Sticks mini ( 12 cm long, 12 mm Ø – Replacement in the standard 12 Pack (length = 20 cm)
- Â 3x 42 white and 7016 anthracite grey
- Â 2x 76 transparent
-
Novoryt PET-Box Melting Putty Art.Nr. 110.200
PET-Box Melting Putty
Art.Nr. 110.200
Content:
- 20 pcs. Melting Putty, assorted
- 176 spruce lucent, 173 birdseye maple, 109 fir/spruce medium
- 168 pine heart, 111 oak nature, 112 oak medium, 118 dark beech
- 144 oliv oak, 119 walnut light, 113 bog oak, 171 beech nature
- 175 beech sober light, 114 cherry light, 106 pear
- 115 cherry dark, 123 macorè, 129 mahogany, 135 black
- 149 light grey, 142 special white
special assembly possible on demand..
-
Novoryt PET-Box Melting Putty Art.Nr. 101.200
PET-Box Soft Wax
Art.Nr. 101.200
Content:
- 20 pcs. Soft wax, assorted
- 73 birdseye maple, 76 spruce lucent, 67 pine splint
- 59 ash splint, 07 birch, 11 oak nature, 17 medium beech
- 68 pine heart, 14 cherry light, 55 beech subdued
- 05 pine, 43 elm, 15 cherry dark, 12 oak medium
- 18 dark beech, 19 walnut light, 13 bog oak,
- 35 black, 77 spruce white varnished, 42 special white
special assembly possible on demand..
-
Novoryt Set A Special Melting Putty Art.Nr. 110.701/110.711
Novoryt Set A Special Melting Putty
Art.Nr. 110.701/110.711
-for new TREND surfacesContent:
- 100 pcs. NOVORYT Melting Putty
- 10 pcs. NOVORYT Touch Up Pens
- 3 Tins of Lacquer Fixation: silk-matt, matt, silk-shine
- 1 Chisel
- 1 draw blade
- 1 gasmelter incl. gas for refill /battery melter
- 1 Replacement Tip for gasmelter /battery melter
- 1 cleaning cloth
- 2 sanding sponge
-
Novoryt Set A Melting Putty Art.Nr. 110.700/110.710
Novoryt Set A Melting Putty
Art.Nr. 110.700/110.710
Content:
- 100 pcs. NOVORYT melting putty
- 20 pcs. NOVORYT soft wax
- 3 Tins of Lacquer Fixation (silk-matt, matt, silk-shine) UN 1950
- 1 gasmelter incl. gas for refill UN1057/Battery melter
- 1 Replacement Tip
- 1 Chisel
- 1 draw blade
- 1 Plastic putty knife
- 2 sanding sponge
- 1 cleaning cloth
-
Novoryt Set C Melting Putty Art. Nr. 110.650/652
Novoryt Set C Melting Putty
Art. Nr. 110.650/652
Content:
- 60 pcs. NOVORYT melting putty
- 1 Tin of Lacquer Fixation, (silk-matt) UN1950
- 1 Chisel
- 1 Plastic putty knife
- 1 gasmelter incl. gas for refill UN1057/Battery melter
- 2 sanding sponge
- 1 cleaning cloth
- 1 draw blade
-
Novoryt Set D – craftsman set Melting Putty Art. Nr. 110.665/670
Novoryt Set D – craftsman set Melting Putty
Art. Nr. 110.665/670
Content:
- 30 pcs. NOVORYT melting putty
- 10 pcs. NOVORYT soft wax
- 10 pcs. NOVORYT retouching touch up pens valve system
- 1Â Fixation Lacquer 150ml silk-matt UN1950
- 1 Â Gas Melter incl. Â gas for refill UN1057/Battery Melter
- 1 Â Plastic putty knife
- 2 sanding sponge
- 1 cleaning cloth
- 1 draw blade
-
Novoryt Set 40 Melting Putty Art.Nr. 110.640/110.643
Novoryt Set 40 Melting Putty
Art.Nr. 110.640/110.643
Content:
- 40 pcs. NOVORYT Melting Putty
- 1 plastic putty-knife with indentation and comb for cleaning
- 1 draw blade
- 1 gasmelter incl. gas for refill or Battery Melter
- 1 cleaning cloth
- 2 sanding sponge
-
Novoryt Set 40-Trend colours Melting Putty Art. Nr. 110.644
Novoryt Set 40-Trend colours Melting Putty
Art. Nr. 110.644
Content:
- 40 pcs. Melting Putty trend colours
- 5 pcs. Touch Up Pen Valve System (302 beech, 19 walnut, 402 walnut light reddish, 11 oak light, 860 walnut dark)
- 1 Gas Melter incl. gas for refill UN1057/Battery Melter
- 1 Plastic putty knife
- 2 sanding sponge
- 1 draw blade
-
Novoryt Set 20 Melting Putty Art. Nr. 110.620/623
Novoryt Set 20 Melting Putty
Art. Nr. 110.620/623
Content:
- 20 pcs. Melting Putty
- 1 Gas Melter incl. gas for refill UN1057/Battery Melter
- 1 Plastic putty knife
- 2 sanding sponge
- 1 draw blade
-
Novoryt Pet-Box Ventilsystem Art. Nr. 142.101
Pet-Box , Ventilsystem – trendige Holztonserie
Art. Nr. 142.101
- 8 covering wooden colours
- 103 maple yellow, 172 beech bright, 175 beech, 176 cherry tree oxford
- 174 decor oak base, 129 mahogany, 119 walnut bright
- 131 wenge, 35 black and 42 white covered
- Including. 10 replacement tips
-
Novoryt Retoucher color box
Novoryt Retoucher color box
12 high quality acrylic paint for retouching incl. brush
Focussed on the current colour trend. Retouching made easy! From translucent to opaque – you decide the final colouring. Can be used inside and outside on wood, plastic and reproductions
Art. Nr. 148.053
white RAL9010, black RAL 9005, yellow RAL 1023
Red RAL 3000, blue RAL 5002, maple/birch, oak
beech, cherry tree, chestnut, walnut, mahoganyTo use only with solvent/diluter
-
Novoryt Pet box with 10 Renolit colours Art. Nr. 143.100
Pet box with 10 Renolit colours
Art. Nr. 143.100
7016.05 anthracite grey, 7012.05 basalt grey, 7155.05 silver grey
1379.05 cream-white, 8518.05 black-brown, 6125.05 dark green
2178,001 golden oak, 2178,007 nut tree, 2052.089 oak dark
2065.021 sapeli/mahagony
Including. 10 replacement tipsAdditional colours on request
-
Novoryt Lacquer Fixation
NOVORYT Lacquer Fixation
Art. Nr. 160.xxx / Art. Nr. 161.xxx
Give the repaired site the final touch to the achievement! With the NOVORYT lacquer fixation allow you to adjust the mended areas back to the environment without any annoying edges and give it back the original surface gloss. NOVORYT Lacquer Fixation is available in matt, silk-matt and silk-shine. They are available in two different sizes: 400 ml and 150 ml.
-
Novoryt Acrylic lacquers
Novoryt Acrylic lacquers
NEW available: Pigmented acrylic lacquer for the colouring of surfaces, colour matching, or refinishing of repair work.
Novoryt acrylic lacquer is a special paint system, which because of its transparency allows to paint without leaving any strong stains on pre-treated areas. The use of special solvent combinations results in a soft spray pattern without leaving a visible edge.
-
Novoryt Rapid Adhesive Set
The NOVORYT Rapid Adhesive Set
Art. Nr. 800.020
is a two component system and consists of an adhesive and an activator. The activator serves mainly as an accelerator of the adhesive process, the adhesive can also be used as a sole component. With the correct usage of these two components you get a long lasting and very strong connection of MDF, wood, rubber, PVC and most synthetic materials.
-
AHEC Europe American Tulipwood
AHEC Europe American Tulipwood
The sapwood is creamy white and may be streaked, with the heartwood varying from pale yellowish brown to olive green. The green colour in the heartwood will tend to darken on exposure to UV light and turn brown. The wood has a medium to fine texture and is straight grained. The size of the sapwood and some physical characteristics will vary according to growing regions. The wood has many desirable characteristics and is suitable for a wide variety of important uses. Tulipwood is not a poplar (Populus) and has many superior properties. However the tree resembles the shape of the European poplar, hence its name in the USA.
-
AKE Universal Circular Saw Blade 001415030
Longitudinal cut, cross cut. For universal application
-
AKE Universal circular saw blade 001445001
Longitudinal cut, cross cut. For universal application
-
AKE Circular panel sizing saw blade 002122030
Longitudinal and cross cut
-
AKE Circular panel sizing saw blade 002430030
Panel sizing. Single cut or in packs
-
AKE Circular panel sizing saw blade 002437030
Panel sizing. Single cut or in packs
-
AKE Circular scoring saw blade 002608020
Scoring of laminated wood-based material, parallel feed Scoring of post forming components.
-
AKE Circular scoring saw blade 002615006
Scoring of laminated wood-based material, parallel feed. Scoring of post forming components.
-
AKE Circular saw blade for aluminium 004017030
Panel sizing and cross cut in profile and solid block, Sizing and cross cut in profiles, plates, blocks, rods
-
AKE Circular saw blade for aluminium 004042034
Panel sizing and cross cut in profile and solid block, Sizing and cross cut in profiles, plates, blocks, rods
-
RIEPE Electronically controlled release agent spraying unit
Upstream of the formatting unit, an ultra-thin coat of the release agent LPZ/II? is applied to the top and bottom surface of the workpieces (edge area) by means of our electronically controlled release agent spraying unit. This prevents squeezed out glue from adhering to the workpiece.
An ultra-thin application of our release agent in the edge area (consumption per nozzle under 1 liter per 5000 running meters) guarantees a perfect result.
The electronically controlled release agent spraying unit only requires a 3 bar compressed air connection and a 230/24V outlet.
Our special release agents are adapted to all commercially available glues. In illustration 1 you can see the installation of the spraying unit inside the cladding directly before the formatting unit, with the relevant fixing bracket. Our fine nozzles are not sensitive to dust and can therefore be fitted directly in front of the tooling.
In illustration 2 you can see the installation outside the cladding, prior to formatting, with the appropriate bracket. On the opposite side of the machine the unit is connected to the longitudinal fence with the appropriate bracket. We also have an assortment of special fixings to meet your needs.
For post- or softforming machines our high heat resistant release agent TH97? is used. This special release agent can pass without problem through hot zones without losing its effectiveness. -
RIEPE Electronically controlled cleaning agent spraying unit
This unit is used to spray the cleaning agent LP163/93? on the top and bottom surface of the board edge, as well as the edgeband. The release agent applied at the machine infeed side and the loose glue residue are removed by the application of the cleaning agent and subsequent buffing.
Furthermore, the glue joint and the edge banding are cooled. Heat generation during buffing is considerably reduced by the application of the liquid. Smearing of glue emerging from the joint is avoided. The edge banding radius is wet buffed with the special cleaning agent LP163/93?. As a consequence, heating of the thermoplastic material is notably reduced, and a smearing of the plastic is prevented. Moreover, the radius is polished to match the surface sheen. Glue residue no longer adheres to the buffing wheels.
Result: An absolutely clean board edge!
This result can only be obtained when the buffing wheels is used across its entire width without oscillation. The buffing disc must be used with an inclination in relation to the workpiece of 3?, without oscillation and applying only slight pressure.
Rotational direction should be in synchronous run to reduce heat generation.
Consumption per fine nozzle: under 1 liter for 5000 running meters. The electronically controlled cleaning agent spraying unit only requires a compressed air connection of 3 bar and a 230/24 V socket. -
RIEPE Electronically controlled antistatic-coolant spraying unit
To cool the glue joint and statically discharge the edging material
The perfect addition to the release agent spraying unit fitted at the machine infeed and the cleaning agent spraying unit fitted at the end of the machine is the antistatic-coolant unit shown in the adjacent photograph. It can be fitted downstream of the last contact pressure roller, upstream of the cross cut saws or upstream of the radius milling stations.
The antistatic-coolant LP289/99? is sprayed directly on the glue joint and on the edging material by means of our spraying units.
As a result the glue joint surface is hardened. The glue buildup on the tools is notably reduced and consequently the glue is no longer transferred onto the edging material. Furthermore, the edging material is statically discharged. Tracer rollers and workpieces remain free from milling chips.
Milling off (flush trimming) the PVC or PP edges causes static charging of the edging material and the adjoining top and bottom face of the workpieces.
Milled off chips adhere to the edging material and on the top and bottom surface of the panel negatively impairing the
function of the tracer rollers and making a precise finishing by scraper blades or milling impossible.
This unit remedies the above problems instantly !! -
RIEPE Edging Material Moistening Acrylic – Aluminium
The antistatic cooling agent spraying unit can be equipped with an additional fine spray nozzle. This nozzle is used to
apply the release agent NFLY?? laterally to the edging material surface. As result damage to sensitive edging material (Acrylic/Aluminium) caused by the detection shoes is avoided.
In addition, protective film on the edgeband is prevented from becoming detached. -
RIEPE Release Agent LP113/03?
The Release Agent LP113/03? is sprayed onto the corner area of the glued on longitudinal edge to prevent the adherence of glue emerging in the corner as a result of the cross gluing process. The picture shows a fine nozzle used to spray the release agent LP113/03? onto the trailing edge moving in the running
direction. -
RIEPE Cleaning Agent LP163/93?
Spray onto the upper and lower edge area of the workpiece
? Removal of release agent and loose glue residue
? Cooling of the edgeband and glue joint
? Matt radius of the machined edgeband re-matches the surface finish -
Timus Semi Automatic Edge Banding Machine
Semi Automatic Edge Banding Machine
Earlier wood working professionals used to paste the tape on boards manually but now edge banding machines are used globally. We have wide range of edge banding machines like portable, manual, semi-automatic, through feed etc.
Our imported quality edge banding machines have precisely crafted parts which gives best finish on every use.
-
Timus Cold Press Machine
Cold & Hot Press Machine
For flattening, bonding, veneering and pressing of sheets cold and hot press machines are used. In cold press machines as the name signifies the pressing is done at room temperature no heat is involved in the process whereas in hot press machine sheets are heated while being pressed. Cold press machines take more time to finish the job whereas hot press takes comparatively less time due to high temperature involved which can be as high as 300o C and flatness of the hot press is higher.
-
Timus Manual Edge Banding Machine MD-45
Manual Edge Banding Machine MD-45
Earlier wood working professionals used to paste the tape on boards manually but now edge banding machines are used globally. We have wide range of edge banding machines like portable, manual, semi-automatic, through feed etc.
Our imported quality edge banding machines have precisely crafted parts which gives best finish on every use.
-
Timus Portable Edge Banding Machine FC1001S
Portable Edge Banding Machine FC1001S
Earlier wood working professionals used to paste the tape on boards manually but now edge banding machines are used globally. We have wide range of edge banding machines like portable, manual, semi-automatic, through feed etc.
Our imported quality edge banding machines have precisely crafted parts which gives best finish on every use.
-
Timus Full-Automatic Edge Banding Machine 515-5C
Full-Automatic Edge Banding Machine 515-5C
Earlier wood working professionals used to paste the tape on boards manually but now edge banding machines are used globally. We have wide range of edge banding machines like portable, manual, semi-automatic, through feed etc.
Our imported quality edge banding machines have precisely crafted parts which gives best finish on every use.
-
Timus Timus Full-Automatic Edge Banding Machine 468J
Full-Automatic Edge Banding Machine 468J
Earlier wood working professionals used to paste the tape on boards manually but now edge banding machines are used globally. We have wide range of edge banding machines like portable, manual, semi-automatic, through feed etc.
Our imported quality edge banding machines have precisely crafted parts which gives best finish on every use.
-
Timus SLIDING TABLE SAW MJ-6132YIII
SLIDING TABLE SAW MJ-45YD 3000
Panel sizing machines are used for cutting panels and specific size boards of wood, wooden composites, MDF, HDF, acrylic sheets, ply wood, laminates, PVC, u-PVC, aluminium etc.
Machines in which blade is stationary whereas work piece moves are generally known as panel saw machines and panel sizing machines in which work piece is stationary whereas blade moves are known commonly known as beam saw machines. Our panel sizing machines are embedded with heavy duty motor and made of robust material with laser like precision to achieve the best quality possible.
We have wide array of panel sizing machines ranging from manual to fully automatic CNC based machine.
-
Timus SLIDING TABLE SAW MJ-45YD 3000
SLIDING TABLE SAW MJ-45YD 3000
Panel sizing machines are used for cutting panels and specific size boards of wood, wooden composites, MDF, HDF, acrylic sheets, ply wood, laminates, PVC, u-PVC, aluminium etc.
Machines in which blade is stationary whereas work piece moves are generally known as panel saw machines and panel sizing machines in which work piece is stationary whereas blade moves are known commonly known as beam saw machines. Our panel sizing machines are embedded with heavy duty motor and made of robust material with laser like precision to achieve the best quality possible.
-
Timus Portable Hinge Drilling MZ73031
Portable Hinge Drilling MZ73031
Mini Woodworking Boring Machine Portable Hinge Drilling Machine for Cabinet Door Easy to operate. Can be operated by one hand. High power and more durable. Adjustable depth. Accurate and Precise. Thickened bottom plate. Bold and thick material so not easy to deform and damage.
-
Timus Three Drilling Machine MZ73213A
Three Drilling Machine MZ73213A
Wood Working Boring Machine is used to drill holes of hinge for doors and windows Machine tools elements are of superior steel materials Drilling depth is adjustable. The depth of drilling and the distance between holes are all made by inductive switch which is fast and accurate. It has PLC Industrial Control System of brand Touch Screen, which is powerful and has low failure rate. The drilling row has a large drilling range, and all the drill bits use quick connectors, which is convenient and quick.
-
Timus Straight Line Rip Saw (MJ164)
Straight Line Rip Saw (MJ164)
The principle of saw cutting under the wood makes the cutting process steadier, smoother & safer for operating The arbor of saw blade and motor is the same, it makes the operation steadier. There are 8 sets upper press roller, the dense arrangement makes the track feeding steady to achieve accurate effect of processing The saw arbor’s lifting is adjustable depends on the thickness of the wood to reduce the crack on cutting. It gives modified straight line processing, skill free operation, guarantee the conjunction, high efficiency and high success rate. The feeding track will insure the straight line of processing surface due to the multilayer V type lower guide plate.
-
Timus Finger Jointing MH1525/MH1540
Finger Jointing MH1525
This machine is used for making the finger shape at one end of wood board. It first cut the end to make it ready for shaping, then make the finger shape by tenon cutter.
Categories