J K Machine Hot Press
3600
Roll over image to zoom in
Hot Press is used to press and paste the mica to the board. In this machine the mica and the particle board are bonded together with the help of adhesive and heat of electrical heaters. The adhesive is applied on the board the mica and are placed in the machine. The heaters at the set temperature are heated and maintain that temperature automatically and the bottom plates of the press with the help of a switch start moving toward the upward direction. At the set pressure the plate will stop and start moving downward at the interval set by the user. Remove the board, mica is pasted on the board is ready for use.
Hot Press is used to press and paste the mica to the board. In this machine the mica and the particle board are bonded together with the help of adhesive and heat of electrical heaters. The adhesive is applied on the board the mica and are placed in the machine. The heaters at the set temperature are heated and maintain that temperature automatically and the bottom plates of the press with the help of a switch start moving toward the upward direction. At the set pressure the plate will stop and start moving downward at the interval set by the user. Remove the board, mica is pasted on the board is ready for use.
Additional information
| Weight | 2800 kg |
|---|---|
| Model Number | Hot Press |
| Usage | Press for laminate / veneer on MDF/ chipboard/ plywood, etc. |
| Dimension(L*W*H) | 16 x 12 ft |
| Net weight | 2800 kgs |
| Material | Heavy duty frame structure and strong supports assure perfect stability |
| Load capacity/Life Cycle | Time taken to paste both side of mica 5 minutes |
| Power(W) | 3 HP |
| Thickness | NA |
| Voltage | 20 kw |
| Speed | NA |
| Delivery Detail | Delivered and installed by manufacturer. Cost on actuals. |
Reviews
There are no reviews yet.