Shreepal
-
AKE Circular panel sizing saw blade 002122030
Longitudinal and cross cut
-
AKE Circular panel sizing saw blade 002430030
Panel sizing. Single cut or in packs
-
AKE Circular panel sizing saw blade 002437030
Panel sizing. Single cut or in packs
-
AKE Circular saw blade for aluminium 004017030
Panel sizing and cross cut in profile and solid block, Sizing and cross cut in profiles, plates, blocks, rods
-
AKE Circular saw blade for aluminium 004042034
Panel sizing and cross cut in profile and solid block, Sizing and cross cut in profiles, plates, blocks, rods
-
AKE Circular scoring saw blade 002608020
Scoring of laminated wood-based material, parallel feed Scoring of post forming components.
-
AKE Circular scoring saw blade 002615006
Scoring of laminated wood-based material, parallel feed. Scoring of post forming components.
-
AKE Universal Circular Saw Blade 001415030
Longitudinal cut, cross cut. For universal application
-
AKE Universal circular saw blade 001445001
Longitudinal cut, cross cut. For universal application
-
RIEPE Cleaning Agent LP163/93?
Spray onto the upper and lower edge area of the workpiece
? Removal of release agent and loose glue residue
? Cooling of the edgeband and glue joint
? Matt radius of the machined edgeband re-matches the surface finish -
RIEPE Edging Material Moistening Acrylic – Aluminium
The antistatic cooling agent spraying unit can be equipped with an additional fine spray nozzle. This nozzle is used to
apply the release agent NFLY?? laterally to the edging material surface. As result damage to sensitive edging material (Acrylic/Aluminium) caused by the detection shoes is avoided.
In addition, protective film on the edgeband is prevented from becoming detached. -
RIEPE Electronically controlled antistatic-coolant spraying unit
To cool the glue joint and statically discharge the edging material
The perfect addition to the release agent spraying unit fitted at the machine infeed and the cleaning agent spraying unit fitted at the end of the machine is the antistatic-coolant unit shown in the adjacent photograph. It can be fitted downstream of the last contact pressure roller, upstream of the cross cut saws or upstream of the radius milling stations.
The antistatic-coolant LP289/99? is sprayed directly on the glue joint and on the edging material by means of our spraying units.
As a result the glue joint surface is hardened. The glue buildup on the tools is notably reduced and consequently the glue is no longer transferred onto the edging material. Furthermore, the edging material is statically discharged. Tracer rollers and workpieces remain free from milling chips.
Milling off (flush trimming) the PVC or PP edges causes static charging of the edging material and the adjoining top and bottom face of the workpieces.
Milled off chips adhere to the edging material and on the top and bottom surface of the panel negatively impairing the
function of the tracer rollers and making a precise finishing by scraper blades or milling impossible.
This unit remedies the above problems instantly !!